Ehdas Sanat Company (ESC) as a leading and distinctive company has the ability to design and manufacture all devices and equipment of sheep slaughter line with the latest technology in the world. Some of these devices and equipment are listed at the bottom of the tabs with pictures:
- Restriner
- Sheep dehider
- Slaughter table
- Mechanized blood collection rails
- Blood collection hooks and ropes
- conveyor Dehiding
- Dressing conveyor
- Sheepracks with rollerhook
- White offal transfer chute
- leg cleaning
- head cleaning
- conveyor for Gut / orgen
- Rumen transfer conveyor
- hand washing and knife sterilizer
- sheep's arms and legs cutter
- offal trolley
- 12Point offel roller hook
- Rail weighing machine
- PLC
- 4Point sheep roller hook
- Carcass washing cabin
The function of this device is to guide live animals from the entrance door of the hall to the slaughter table. The device consists of two conveyors, which are V-shaped in front of each other. The lower part of the device is open for hanging the animal’s foot, at the end of this device, according to the position of the animal in the device, the animal can be easily shocked. Each set of conveyors has two links and steel chains that are installed on the chains above the steel plates.
- The frame of the device is completely galvanized
- Conveyor made of compressed plastic with steel bottom plates – Length of the device: 2.5 meters
- Capacity: 100-450 heads per hour
- Power supply: 380 volts with 3-phase motor
- Motor power: 2.2 * 2 kW
Click on the images below to view them in a larger size!
– Steel chassis with dachromat coating
– Skinning capacity of 180 animals per hour
– Power consumption 380 volts – three phases
– Engine power: 4 kW
– Drum material: stainless steel
– This machine has hydraulic jack, hydraulic motor and hydraulic power pack.
– Weight of the device: 500 kilograms
– Skin separation from top to bottom
– The rotation speed of the peeling drum can be adjusted by the operator by the speed control valves placed on the moving hydraulic power.
Click on the images below to view them in a larger size!
In order to receive the animal, it is the exit of the restrainer opening, which is located below the blood collection line, and if the head is placed on the line, it will transfer the slaughtered animal to the blood collection hook without slipping.
- Dimensions: 1200 * 800 mm
- Material of steel surface with a thickness of 2.5 mm
- Steel profile table frame
Click on the images below to view them in a larger size!
This type of conveyor is a type of Power & Free conveyor that mechanically transfers the two legs of the animal to the end of the blood collection line after delivery. Hot-dip galvanized chain with hook body with hard plastic wheels and stainless steel screws with special steel grips is one of the advantages of water lubrication line without the need for lubrication system with the ability to rotate in three axes and direct line movement for this reason. The carcass lifting device in the above system is integrated with a blood collection rail and a separate device is not provided.
- One meter line step
- Has electronic speed planning and control system
- European power consumption 1.5 kW
Click on the images below to view them in a larger size!
- Blood collection line equipped with hooks with hook body specifications made of compressed plastic and connector with 304L stainless steel hook
- It has two wheels made of polytramide with glass filler, inside which a steel ball is installed, which is assembled on the chain, and no grease or oil is needed for lubrication.
- It has 3 degrees of freedom of rotation and one degree of linear freedom
- Wheel diameter: 80 mm
Click on the images below to view them in a larger size!
This device is intended for horizontalizing the carcass and catching the back of the sheep to facilitate the pre-skinning operation and transferring the two hands of the sheep to the hooks of the skinning line and is installed on the arrowhead.
- Steel frame with hot dip galvanizing
- Compressed air consumption of the system: 0 cubic meters per hour
This system operates mechanically and the conveyor is of Power & Free type and the carcass moves only under the transmission force of the conveyor and without hand contact. Rails made of hot-dip galvanized shield in half-meter to three-meter pieces, depending on the design of the slaughter site. All technical specifications are provided according to the blood collection line.
- The body is made of compressed plastic and has a stainless steel rake L 340
- It has two large wheels made of hard plastic with steel balls inside
- It has 3 degrees of freedom of rotation and one degree of linear freedom
- Wheel diameter: 100 mm
Click on the images below to view them in a larger size!
This system operates mechanically and its conveyor is of Power & Free type and the carcass moves only under the transmission force of the conveyor and without hand contact. The rails are made of hot-dip galvanized shield in two-meter and three-meter parts.
- Special chains with hard plastic wheels and chains made of alloy steel with galvanized coating and SS304 steel handles
- With the ability to rotate on three axes and direct movement of the line
- Line step 1 meter
- Has electronic speed planning and control system
- European power consumption 1.5 kW
- Steel body
- 2 KW actuator motor
Click on the images below to view them in a larger size!
- Hot galvanized body
- Electric motor 2/2 kW three-phase electricity
- Machine weight 180 kg
Click on the images below to view them in a larger size!
This line is for transferring and inspecting viscera.
- Conveyor rails made of steel in two meter pieces
- Special rod for German rod with hard plastic wheels and link with steel ball
- Compatible with the killing line
- On the line, in addition to installing a special rake to hang the head, the heart and liver have also been predicted.
- Has electronic speed planning and control system
- European power consumption 0.75 kW
- Bases made of 340 steel profile with the ability to adjust the height and bolt on the ground axes
- The drums are made of 340 stainless steel rollers made of green pipe with a thickness of 5 mm and with plastic bearings with 306 bullets, at 50 cm intervals to prevent belt pressure, also during the canoe under the steel stud belt.
- E78RN food industry belt with a width of 100 mm with a speed of 6 meters per minute and the ability to synchronize with the line.
- Dimensions of the device: length * width * height 900 * 1100 * 1000 mm
- Engine power 1.1 kW
It is used for washing hands and sterilizing knives and is equipped with a 0.5-inch mixing valve with a valve.
- Material: stainless steel
- Dimensions of the device: (length * width * height) 390 * 420 * 900 mm
- It has a knife sterilizer with the ability to inject hot water from below and with a capacity of 6 knives.
Click on the images below to view them in a larger size!
- Has a hydraulic power pack with 4 horsepower
- Compressed air 8 to 10 bars
- Consumption of compressed air: 1 cubic meter per hour
- 24V direct power
- The weight of the device is 32 kg
Click on the images below to view them in a larger size!
The recording contaminant is collected inside these pallets and transferred to the waste room and is equipped with a suspended door in the upper part.
- Dimensions: length * width * height 850 * 600 * 550 mm
- Capacity 200 liters
- Main tank material: 304 stainless steel
- It has four wheels, 2 free ones and 2 locks
Click on the images below to view them in a larger size!
- Made of steel profiles
- Steel clasp for hanging heart and liver
- Equipped with 2 free wheels and 2 locked wheels
- Dimensions: 2 * 0.8 * 1.8 meters
Click on the images below to view them in a larger size!
It is located at the end of the abdominal emptying line and weighs linearly.
- Machine capacity: 300 kg
- Accuracy: 25 ± g
- Load cell made in Europe and has a valid PTR / UCM / OIML standard
- Display with 5 digits to display the weight on the spot
- Ability to connect to a computer with RS2323 protocol
- Ability to connect to EPSON printer and female label
- Resistant to ambient humidity up to 95%
- Heat resistant to +40 to -10 degrees
Click on the images below to view them in a larger size!
This panel is used to control all electrical components of the line and includes all switches, fuses, lamps and control switches and emergency stop switches of line equipment. All machinery and equipment are controlled and controlled by a control panel
- Contactor and bimetallic switch-Miniature switch-All power made of Schneider France and PLC Amron Japan
- Amron and Micro Switches PLC Inverter Yaskawa Japan Power supply and switch fuses and operator switches and signal lamps and switches according to IEC standard
- All equipment in accordance with the standard of panels used in the distribution network as well as global standards
In order to prevent rust, all houses and panel surfaces are painted. For this purpose, the following processes are performed.
- Infrastructure: Includes rust removal, degreasing, phosphating, and a primer
- Painting: The color of the boards is kiln paint and between 2 to 3 layers of coating
Click on the images below to view them in a larger size!
- The hook hook is made of compressed aluminum and injection in the form of die
- The body of the hooks is made of steel or iron with hard chrome
Click on the images below to view them in a larger size!
- Chassis made of steel profile
- The walls of the device are made of stainless steel
- Dimensions of the device: (length * width * height) 1 * 1 * 2 m
- Polyethylene pipes with plastic nozzles for spraying water on the carcass
Click on the images below to view them in a larger size!